Search
Close this search box.
View Quote

6335 Bordo Spiral Flute Tapered Bridge Reamers HSS Metric / Select Size

Brand

Bordo Industrial Tools

Item #

6335MET

MOQ

1

Categories

, ,
Add to quote

Bridge reamers are used to create an aligned hole in a structural steel assembly These reamers enlarge and align holes for rivets and bolts in structural steel members such as I-beams angles channels and plates.

The reamer is tapered for approximately half its FL allowing the reamer to enter out-of-line holes often encountered in structural work All tools are constructed with left-hand spiral and right-hand cut The left-hand spiral eliminates the tendency of the reamer to pull itself into the hole.

In large structural assemblies the holes are generally punched undersize and then reamed when in position The idea is that the holes most likely will not line up within about 1/8″ when a fabricated 50 foot beam or column is finally put into place.

Coolant or cutting tool lubricant should be utilitised when possible Benefits include better finishes superior tool life and the ability to increase speeds and feeds.

Bridge reamers should be run at half the R.P.M suggested for a corresponding twist drill size.

 

Description

Bridge reamers are used to create an aligned hole in a structural steel assembly These reamers enlarge and align holes for rivets and bolts in structural steel members such as I-beams angles channels and plates.

The reamer is tapered for approximately half its FL allowing the reamer to enter out-of-line holes often encountered in structural work All tools are constructed with left-hand spiral and right-hand cut The left-hand spiral eliminates the tendency of the reamer to pull itself into the hole.

In large structural assemblies the holes are generally punched undersize and then reamed when in position The idea is that the holes most likely will not line up within about 1/8″ when a fabricated 50 foot beam or column is finally put into place.

Coolant or cutting tool lubricant should be utilitised when possible Benefits include better finishes superior tool life and the ability to increase speeds and feeds.

Bridge reamers should be run at half the R.P.M suggested for a corresponding twist drill size.

 

Item # Size (mm) Min Dia (mm) Max Dia (mm) Taper Length (mm) FL (mm) O/A L (mm) MTS # Barcode MOQ
6335-13.00 13 8.8 13 42 105 199 2 9326518160847 1
6335-14.00 14 9.4 14 46 115 209 2 9326518160854 1
6335-16.00 16 10.6 16 54 135 229 2 9326518160861 1
6335-17.00 17 11.6 17 54 135 251 3 9326518160878 1
6335-18.00 18 12.2 18 58 145 261 3 9326518160885 1
6335-19.00 19 13.2 19 58 145 261 3 9326518160892 1
6335-20.00 20 13.8 20 62 155 271 3 9326518160908 1
6335-21.00 21 14.8 21 62 155 271 3 9326518160915 1
6335-22.00 22 15.4 22 66 165 281 3 9326518160922 1
6335-23.00 23 16.4 23 66 165 281 3 9326518160939 1
6335-24.00 24 16.8 24 72 180 296 3 9326518160946 1
6335-25.00 25 17.8 25 72 180 296 3 9326518160953 1
6335-26.00 26 18.8 26 72 180 296 3 9326518160960 1
6335-28.00 28 20.2 28 78 195 311 3 9326518160977 1
6335-30.00 30 22.2 30 78 195 311 3 9326518160984 1

Bordo ⇨ Reamers ⇨ Bridge

https://www.bordo.com.au/

Description

Bridge reamers are used to create an aligned hole in a structural steel assembly These reamers enlarge and align holes for rivets and bolts in structural steel members such as I-beams angles channels and plates.

The reamer is tapered for approximately half its FL allowing the reamer to enter out-of-line holes often encountered in structural work All tools are constructed with left-hand spiral and right-hand cut The left-hand spiral eliminates the tendency of the reamer to pull itself into the hole.

In large structural assemblies the holes are generally punched undersize and then reamed when in position The idea is that the holes most likely will not line up within about 1/8″ when a fabricated 50 foot beam or column is finally put into place.

Coolant or cutting tool lubricant should be utilitised when possible Benefits include better finishes superior tool life and the ability to increase speeds and feeds.

Bridge reamers should be run at half the R.P.M suggested for a corresponding twist drill size.

 

Additional information

Dropdown

, , , , , , , , , , , , , ,

Brand

COLLINS TOOLS & WELDING SUPPLIES IS PROUDLY A 100% AUSTRALIAN OWNED FAMILY BUSINESS OFFERING EXPERT ADVICE AND GREAT PRICES

Testimonial

I have been doing business with Collins Tools for many years now. I have found the staff to be extremely helpful and prepared to go the extra yard to get the job done.
Greg Towers
STODDART MANUFACTURING | STODDART MANUFACTURING
The team at Collins is always helpful and it’s nice to find honest advice in such a competitive market. Collins has often gone “above and beyond” to help us with after hour service and dropping off urgent orders.
Justin Lough
Operations Manager | Marine Engineers
can confidently recommend Collins Tools as a solid reliable supplier and experts in their field ,that are willing and able to accommodate the home handy man through to large, highly skilled, modern workshops.
Glenn Field
Incitic Pivot | Welding Supervisor/Inspector

Shop

Links

Follow Us

Hi there.

Want to get in touch?

Drop us a line