252Z Starrett Height Transfer Gage / Select

Brand

Starrett Precision Tools

Item #

Starrett252Z

MOQ

1

Categories

Gauges, Height Gauges, Measuring & Precision Tools

Select

The Starrett 252 Height Transfer Gage is ideal for use with test indicators or electronic amplifiers to accurately transfer height settings from gage blocks, height gages and other standards.

Extreme rigidity provides the vibration proof stability necessary to permit precise, repeat readings with indicators of the highest amplification
Extremely rigid, rectangular box-type hollow column mounted integrally on a heavy base
Adjusting mechanism is located in the base so the column and indicator are isolated and not affected by external factors, i.e. heat or hand pressure
Hand-fitting base design for sure-grip handling and easy movement
Bottom of the base has three ground and lapped pads for stability and smooth movement on the surface plate
Adjustable slide, incorporating a snug for holding test indicators or electronic gage heads, has rapid vertical manual adjustment
Thumb screw allows slide to be locked
Knob on base allows fine vertical adjustment of the slide unit relative to the fixed column
A snug on the slide provides two holes (.375″ [9.5mm] and .156″ [4mm]) for holding gage rods or scribers
The rod has a major diameter of .375″ (9.5mm) and stepped diameters of 1/4″ (3.2mm) and 7/32″ (5.5mm) at one end and 5/16″ (8mm) at the opposite end.
Starrett 25, 81, 655 and 656 Series Dial Indicators also can be used on the height gage by means of a PT06784-A Gage Rod

Specification	252Z-48	252Z-24
Type	Height Transfer Gage	Height Transfer Gage
Spec	Base Size (Approximate) 9″ L x 6″ W (225mm x 150mm)	Base Size (Approximate) 7-1/2″ L x 4-1/2″ W (190mm x 115mm)
Range (in)	0-48″	0-24″
Range (mm)	0-1200mm	0-600mm

Description

The Starrett 252 Height Transfer Gage is ideal for use with test indicators or electronic amplifiers to accurately transfer height settings from gage blocks, height gages and other standards.

Extreme rigidity provides the vibration proof stability necessary to permit precise, repeat readings with indicators of the highest amplification
Extremely rigid, rectangular box-type hollow column mounted integrally on a heavy base
Adjusting mechanism is located in the base so the column and indicator are isolated and not affected by external factors, i.e. heat or hand pressure
Hand-fitting base design for sure-grip handling and easy movement
Bottom of the base has three ground and lapped pads for stability and smooth movement on the surface plate
Adjustable slide, incorporating a snug for holding test indicators or electronic gage heads, has rapid vertical manual adjustment
Thumb screw allows slide to be locked
Knob on base allows fine vertical adjustment of the slide unit relative to the fixed column
A snug on the slide provides two holes (.375″ [9.5mm] and .156″ [4mm]) for holding gage rods or scribers
The rod has a major diameter of .375″ (9.5mm) and stepped diameters of 1/4″ (3.2mm) and 7/32″ (5.5mm) at one end and 5/16″ (8mm) at the opposite end.
Starrett 25, 81, 655 and 656 Series Dial Indicators also can be used on the height gage by means of a PT06784-A Gage Rod

Specification	252Z-48	252Z-24
Type	Height Transfer Gage	Height Transfer Gage
Spec	Base Size (Approximate) 9″ L x 6″ W (225mm x 150mm)	Base Size (Approximate) 7-1/2″ L x 4-1/2″ W (190mm x 115mm)
Range (in)	0-48″	0-24″
Range (mm)	0-1200mm	0-600mm

Other Height Gages (starrett.com)

*** Full STARRETT range available so if you don’t see it on our website just get in touch with us!

Description

The Starrett 252 Height Transfer Gage is ideal for use with test indicators or electronic amplifiers to accurately transfer height settings from gage blocks, height gages and other standards.

Extreme rigidity provides the vibration proof stability necessary to permit precise, repeat readings with indicators of the highest amplification
Extremely rigid, rectangular box-type hollow column mounted integrally on a heavy base
Adjusting mechanism is located in the base so the column and indicator are isolated and not affected by external factors, i.e. heat or hand pressure
Hand-fitting base design for sure-grip handling and easy movement
Bottom of the base has three ground and lapped pads for stability and smooth movement on the surface plate
Adjustable slide, incorporating a snug for holding test indicators or electronic gage heads, has rapid vertical manual adjustment
Thumb screw allows slide to be locked
Knob on base allows fine vertical adjustment of the slide unit relative to the fixed column
A snug on the slide provides two holes (.375″ [9.5mm] and .156″ [4mm]) for holding gage rods or scribers
The rod has a major diameter of .375″ (9.5mm) and stepped diameters of 1/4″ (3.2mm) and 7/32″ (5.5mm) at one end and 5/16″ (8mm) at the opposite end.
Starrett 25, 81, 655 and 656 Series Dial Indicators also can be used on the height gage by means of a PT06784-A Gage Rod

Specification	252Z-48	252Z-24
Type	Height Transfer Gage	Height Transfer Gage
Spec	Base Size (Approximate) 9″ L x 6″ W (225mm x 150mm)	Base Size (Approximate) 7-1/2″ L x 4-1/2″ W (190mm x 115mm)
Range (in)	0-48″	0-24″
Range (mm)	0-1200mm	0-600mm

Additional information

Brand	Starrett Precision Tools
Select	252Z-24 600mm / 24", 252Z-48 120mm / 48"

COLLINS TOOLS & WELDING SUPPLIES IS PROUDLY A 100% AUSTRALIAN OWNED FAMILY BUSINESS OFFERING EXPERT ADVICE AND GREAT PRICES

Testimonial

I have been doing business with Collins Tools for many years now. I have found the staff to be extremely helpful and prepared to go the extra yard to get the job done.

The team at Collins is always helpful and it’s nice to find honest advice in such a competitive market. Collins has often gone “above and beyond” to help us with after hour service and dropping off urgent orders.

can confidently recommend Collins Tools as a solid reliable supplier and experts in their field ,that are willing and able to accommodate the home handy man through to large, highly skilled, modern workshops.

Shop

Links

Follow Us