Search
Close this search box.
View Quote

DLX3137TX1 Makita 18V 3 Pce Brushless Combo Kit – DHP484Z DTD153Z DHR242Z 2 x BL1850B DC18RC & Carry Bag

Brand

Makita Industrial Power Tools

Item #

DLX3137TX1

MOQ

1

Categories

, ,
Add to quote

Kit contains:

  • 18V Brushless Heavy Duty Compact Hammer Driver Drill – DHP484Z
  • 18V Brushless Impact Driver – DTD153Z
  • 18V Brushless 24mm SDS Plus Rotary Hammer – DHR242Z
  • 18V Single Port Rapid Charger – DC18RC
  • 2x 18V 5.0Ah Batteries – BL1850B
  • Carry Bag

Detailed Product Information:

Makita 18V Brushless Hammer Driver Drill (tool only) DHP484Z

  • Brushless motor
  • Mechanical 2 speed gearing
  • Single sleeve keyless chuck
  • Twin LED job light
  • Variable speed control by trigger
  • XPT – eXtreme Protection Technology enhances protection against dust and dripping water

Specifications:
Impacts Per Minute – Hi 0-30 000 ipm
Impacts Per Minute – Lo 0-7 500 ipm
Max Fastening torque 54 Nm
Net Weight 1.8kg w/BL1860B
No Load Speed – Hi 0-2 000 rpm
No Load Speed – Lo 0-500 rpm
Overall Length 182 mm
Capacity – Concrete 13 mm
Capacity – Steel 13 mm
Capacity – Wood 38 mm

Makita 18V Brushless Impact Driver (tool only) DTD153Z

  • High performance brushless motor
  • One touch bit installation
  • Aluminium hammer case
  • Twin LED joblight
  • Variable speed control via trigger
  • Ergonomically designed handle with soft grip
Specifications:
Impacts Per Minute 0-3 600ipm
Max Fastening torque 170N.m
Net Weight 1.5kg (BL1850B)
No Load Speed 0-3 400rpm
Overall Length 126mm
Capacity – Coarse Thread 22-125 mm
Capacity – High Tensile Bolt M5-M14
Capacity – Machine Screws M4-M8
Capacity – Standard Bolt M5-M16

Makita 18V 24mm Rotary Hammer Drill (tool only) DHR242Z

  • Drills in concrete speed is same or surpasses 24V Cordless Combination Hammer model BHR200
  • Has one-touch slide chuck for the SDS plus bit
  • Easy to grip handle
  • Ergonomically made for improved power thrust
  • Secure comfortable grip if drilling with palm up or down
  • Three-mode operation is: Rotation + Hammering Hammering only and Rotation only
  • tool body separated into upper and lower housings at foot of handle portion where housings are jointed with cushioned rubbers that absorb vibrations
  • Better productivity than model DHR202 due to Brushless DC motor that lessens energy loss by 30 percent delivering greater run-times between charging batteries
  • Rubber joint construction lowers transmission of vibrations to battery terminals which decreases battery failure due to terminal breakage or bad electrical contact

Specifications:
Manufacturer Makita
Model No DHR242Z
Battery (Type) Lithium-Ion
Charging Time (min) 22
Battery Quantity (3.0 Ah) 0
Voltage (V) 18
Single Impact Energy (J) 2.4
Blows per minute (BPM) 0 – 4700
No Load Speed (RPM) 0 – 950
Net weight ( kg) 3.3
Capacity in Concrete (mm) 24
Capacity in Steel (mm) 13
Capacity in Wood (mm) 27

Makita Active 7.2-18V Li-Ion Rapid Charger DC18RC 195589-2

  • Fast charging – charges Li-Ion 3.0Ah battery in only 22 minutes
  • Built-in CPU – gathers information from the battery’s memory chip to determine optimum charging method
  • forced air cooling fan – cools the battery to minimise charging time
  • Digital power display identifies the condition of the battery and charging condition

Specifications:
Cell Capacity 1.5-5.0 Ah
Charge Time 15 mins (1.5 Ah) 22 mins (3.0 Ah) 36 mins (4.0 Ah) 45 mins (5.0 Ah)
Net Weight 820 g
Overall Length 185 mm
Voltage 18 V

Makita 18V 5.0Ah Lithium Battery with Charge Indicator BL1850B-L

  • Star Protection
  • Battery Fuel Gauge
  • Multi-contact slide type terminal
  • Protective gel coating
  • Active 3 Controls current voltage and thermal temperature
  • Shock absorbing construction
  • The fastest charge times in the industry
  • Intelligent battery & charger communication system
  • Protective gel coating – Sensitive electronics are protected with a thick gel coating preventing damage against dust & moisture.
  • Shock absorbing construction – Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
  • Multi-contact slide terminal – Ensures stable contact with the tool even under extreme vibration.
  • Overload Protection – The battery and tool communicate protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
  • Over-discharge Protection – Monitors battery charge capacity and cuts power to protect battery cells.
  • Over heat protection – Extreme heat damages ALL batteries If the battery reaches a certain level of heat it will cut power to the tool.
  • Up 66% more run time than BL1830*
  • 4-Stage battery fuel indicator
  • 45 minute charge time

Specifications:
Voltage 18V
Dimensions LxWxH 11 x 8 x 6.5 cm
Weight 0.63 Kg

Description

Kit contains:

  • 18V Brushless Heavy Duty Compact Hammer Driver Drill – DHP484Z
  • 18V Brushless Impact Driver – DTD153Z
  • 18V Brushless 24mm SDS Plus Rotary Hammer – DHR242Z
  • 18V Single Port Rapid Charger – DC18RC
  • 2x 18V 5.0Ah Batteries – BL1850B
  • Carry Bag

Detailed Product Information:

Makita 18V Brushless Hammer Driver Drill (tool only) DHP484Z

  • Brushless motor
  • Mechanical 2 speed gearing
  • Single sleeve keyless chuck
  • Twin LED job light
  • Variable speed control by trigger
  • XPT – eXtreme Protection Technology enhances protection against dust and dripping water

Specifications:
Impacts Per Minute – Hi 0-30 000 ipm
Impacts Per Minute – Lo 0-7 500 ipm
Max Fastening torque 54 Nm
Net Weight 1.8kg w/BL1860B
No Load Speed – Hi 0-2 000 rpm
No Load Speed – Lo 0-500 rpm
Overall Length 182 mm
Capacity – Concrete 13 mm
Capacity – Steel 13 mm
Capacity – Wood 38 mm

Makita 18V Brushless Impact Driver (tool only) DTD153Z

  • High performance brushless motor
  • One touch bit installation
  • Aluminium hammer case
  • Twin LED joblight
  • Variable speed control via trigger
  • Ergonomically designed handle with soft grip
Specifications:
Impacts Per Minute 0-3 600ipm
Max Fastening torque 170N.m
Net Weight 1.5kg (BL1850B)
No Load Speed 0-3 400rpm
Overall Length 126mm
Capacity – Coarse Thread 22-125 mm
Capacity – High Tensile Bolt M5-M14
Capacity – Machine Screws M4-M8
Capacity – Standard Bolt M5-M16

Makita 18V 24mm Rotary Hammer Drill (tool only) DHR242Z

  • Drills in concrete speed is same or surpasses 24V Cordless Combination Hammer model BHR200
  • Has one-touch slide chuck for the SDS plus bit
  • Easy to grip handle
  • Ergonomically made for improved power thrust
  • Secure comfortable grip if drilling with palm up or down
  • Three-mode operation is: Rotation + Hammering Hammering only and Rotation only
  • tool body separated into upper and lower housings at foot of handle portion where housings are jointed with cushioned rubbers that absorb vibrations
  • Better productivity than model DHR202 due to Brushless DC motor that lessens energy loss by 30 percent delivering greater run-times between charging batteries
  • Rubber joint construction lowers transmission of vibrations to battery terminals which decreases battery failure due to terminal breakage or bad electrical contact

Specifications:
Manufacturer Makita
Model No DHR242Z
Battery (Type) Lithium-Ion
Charging Time (min) 22
Battery Quantity (3.0 Ah) 0
Voltage (V) 18
Single Impact Energy (J) 2.4
Blows per minute (BPM) 0 – 4700
No Load Speed (RPM) 0 – 950
Net weight ( kg) 3.3
Capacity in Concrete (mm) 24
Capacity in Steel (mm) 13
Capacity in Wood (mm) 27

Makita Active 7.2-18V Li-Ion Rapid Charger DC18RC 195589-2

  • Fast charging – charges Li-Ion 3.0Ah battery in only 22 minutes
  • Built-in CPU – gathers information from the battery’s memory chip to determine optimum charging method
  • forced air cooling fan – cools the battery to minimise charging time
  • Digital power display identifies the condition of the battery and charging condition

Specifications:
Cell Capacity 1.5-5.0 Ah
Charge Time 15 mins (1.5 Ah) 22 mins (3.0 Ah) 36 mins (4.0 Ah) 45 mins (5.0 Ah)
Net Weight 820 g
Overall Length 185 mm
Voltage 18 V

Makita 18V 5.0Ah Lithium Battery with Charge Indicator BL1850B-L

  • Star Protection
  • Battery Fuel Gauge
  • Multi-contact slide type terminal
  • Protective gel coating
  • Active 3 Controls current voltage and thermal temperature
  • Shock absorbing construction
  • The fastest charge times in the industry
  • Intelligent battery & charger communication system
  • Protective gel coating – Sensitive electronics are protected with a thick gel coating preventing damage against dust & moisture.
  • Shock absorbing construction – Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
  • Multi-contact slide terminal – Ensures stable contact with the tool even under extreme vibration.
  • Overload Protection – The battery and tool communicate protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
  • Over-discharge Protection – Monitors battery charge capacity and cuts power to protect battery cells.
  • Over heat protection – Extreme heat damages ALL batteries If the battery reaches a certain level of heat it will cut power to the tool.
  • Up 66% more run time than BL1830*
  • 4-Stage battery fuel indicator
  • 45 minute charge time

Specifications:
Voltage 18V
Dimensions LxWxH 11 x 8 x 6.5 cm
Weight 0.63 Kg

Buy Makita Industrial Power Tools Cordless Tradesman Quality Industrial Trade Manufacturing Australia Brisbane

Make It Right, Make It Makita Power Tools, LXT Lithium-ion Powered Mobile Power Tools & Outdoor Power Equipment

>>> Full MAKITA range available so if you don’t see it on our website just get in touch with us!

 

 

 

 

Description

Kit contains:

  • 18V Brushless Heavy Duty Compact Hammer Driver Drill – DHP484Z
  • 18V Brushless Impact Driver – DTD153Z
  • 18V Brushless 24mm SDS Plus Rotary Hammer – DHR242Z
  • 18V Single Port Rapid Charger – DC18RC
  • 2x 18V 5.0Ah Batteries – BL1850B
  • Carry Bag

Detailed Product Information:

Makita 18V Brushless Hammer Driver Drill (tool only) DHP484Z

  • Brushless motor
  • Mechanical 2 speed gearing
  • Single sleeve keyless chuck
  • Twin LED job light
  • Variable speed control by trigger
  • XPT – eXtreme Protection Technology enhances protection against dust and dripping water

Specifications:
Impacts Per Minute – Hi 0-30 000 ipm
Impacts Per Minute – Lo 0-7 500 ipm
Max Fastening torque 54 Nm
Net Weight 1.8kg w/BL1860B
No Load Speed – Hi 0-2 000 rpm
No Load Speed – Lo 0-500 rpm
Overall Length 182 mm
Capacity – Concrete 13 mm
Capacity – Steel 13 mm
Capacity – Wood 38 mm

Makita 18V Brushless Impact Driver (tool only) DTD153Z

  • High performance brushless motor
  • One touch bit installation
  • Aluminium hammer case
  • Twin LED joblight
  • Variable speed control via trigger
  • Ergonomically designed handle with soft grip
Specifications:
Impacts Per Minute 0-3 600ipm
Max Fastening torque 170N.m
Net Weight 1.5kg (BL1850B)
No Load Speed 0-3 400rpm
Overall Length 126mm
Capacity – Coarse Thread 22-125 mm
Capacity – High Tensile Bolt M5-M14
Capacity – Machine Screws M4-M8
Capacity – Standard Bolt M5-M16

Makita 18V 24mm Rotary Hammer Drill (tool only) DHR242Z

  • Drills in concrete speed is same or surpasses 24V Cordless Combination Hammer model BHR200
  • Has one-touch slide chuck for the SDS plus bit
  • Easy to grip handle
  • Ergonomically made for improved power thrust
  • Secure comfortable grip if drilling with palm up or down
  • Three-mode operation is: Rotation + Hammering Hammering only and Rotation only
  • tool body separated into upper and lower housings at foot of handle portion where housings are jointed with cushioned rubbers that absorb vibrations
  • Better productivity than model DHR202 due to Brushless DC motor that lessens energy loss by 30 percent delivering greater run-times between charging batteries
  • Rubber joint construction lowers transmission of vibrations to battery terminals which decreases battery failure due to terminal breakage or bad electrical contact

Specifications:
Manufacturer Makita
Model No DHR242Z
Battery (Type) Lithium-Ion
Charging Time (min) 22
Battery Quantity (3.0 Ah) 0
Voltage (V) 18
Single Impact Energy (J) 2.4
Blows per minute (BPM) 0 – 4700
No Load Speed (RPM) 0 – 950
Net weight ( kg) 3.3
Capacity in Concrete (mm) 24
Capacity in Steel (mm) 13
Capacity in Wood (mm) 27

Makita Active 7.2-18V Li-Ion Rapid Charger DC18RC 195589-2

  • Fast charging – charges Li-Ion 3.0Ah battery in only 22 minutes
  • Built-in CPU – gathers information from the battery’s memory chip to determine optimum charging method
  • forced air cooling fan – cools the battery to minimise charging time
  • Digital power display identifies the condition of the battery and charging condition

Specifications:
Cell Capacity 1.5-5.0 Ah
Charge Time 15 mins (1.5 Ah) 22 mins (3.0 Ah) 36 mins (4.0 Ah) 45 mins (5.0 Ah)
Net Weight 820 g
Overall Length 185 mm
Voltage 18 V

Makita 18V 5.0Ah Lithium Battery with Charge Indicator BL1850B-L

  • Star Protection
  • Battery Fuel Gauge
  • Multi-contact slide type terminal
  • Protective gel coating
  • Active 3 Controls current voltage and thermal temperature
  • Shock absorbing construction
  • The fastest charge times in the industry
  • Intelligent battery & charger communication system
  • Protective gel coating – Sensitive electronics are protected with a thick gel coating preventing damage against dust & moisture.
  • Shock absorbing construction – Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
  • Multi-contact slide terminal – Ensures stable contact with the tool even under extreme vibration.
  • Overload Protection – The battery and tool communicate protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
  • Over-discharge Protection – Monitors battery charge capacity and cuts power to protect battery cells.
  • Over heat protection – Extreme heat damages ALL batteries If the battery reaches a certain level of heat it will cut power to the tool.
  • Up 66% more run time than BL1830*
  • 4-Stage battery fuel indicator
  • 45 minute charge time

Specifications:
Voltage 18V
Dimensions LxWxH 11 x 8 x 6.5 cm
Weight 0.63 Kg

Additional information

Brand

COLLINS TOOLS & WELDING SUPPLIES IS PROUDLY A 100% AUSTRALIAN OWNED FAMILY BUSINESS OFFERING EXPERT ADVICE AND GREAT PRICES

Testimonial

I have been doing business with Collins Tools for many years now. I have found the staff to be extremely helpful and prepared to go the extra yard to get the job done.
Greg Towers
STODDART MANUFACTURING | STODDART MANUFACTURING
The team at Collins is always helpful and it’s nice to find honest advice in such a competitive market. Collins has often gone “above and beyond” to help us with after hour service and dropping off urgent orders.
Justin Lough
Operations Manager | Marine Engineers
can confidently recommend Collins Tools as a solid reliable supplier and experts in their field ,that are willing and able to accommodate the home handy man through to large, highly skilled, modern workshops.
Glenn Field
Incitic Pivot | Welding Supervisor/Inspector

Shop

Links

Follow Us

Hi there.

Want to get in touch?

Drop us a line