Search
Close this search box.
View Quote

LOC50ML518 Loctite 518 Gasket Eliminator Flange Sealant / Select Size

Brand

Loctite Adhesives

Item #

LOC50ML518

MOQ

1

Categories

, ,
Add to quote
Loctite Adhesives Industrial Trade Manufacturing Stockist Distributor Australia

Loctite 518 is a medium-strength general purpose gasketing product with excellent contamination tolerance Ideal for use on casted iron steel and aluminum flanges.

Loctite® 518 cures when confined in the absence of air between close-fitting metal surfaces It is an anaerobic gasketing material designed for use on rigid iron aluminum and steel flanged mating surfaces Loctite 518 fills gaps up to 0.25mm and forms a flexible chemical-resistant seal that will not tear or decay Parts disassemble easily even after extended service Typical applications include sealing close-fitting joints between rigid metal faces and flanges It is also used as a formed-in-place gasket on rigid flanged connections e.g transmissions and motor housings.
  • Semi-flexible medium-strength anaerobic flange gasket
  • Easy to automate
  • Reduces process costs – eliminates manual assembly of conventional gaskets
  • NSF P1 Reg No 123758
  • For active and inactive rigid metal flanges
  • Cures through minor surface contamination
  • Adapts to flange surface irregularities and gaps up to 0.25 mm
  • Gel-type consistency
  • Seals instantly against low pressure
  • Reduces inventory costs – no need for large inventory of cut gaskets
  • Resists high pressure when fully cured

Technical Information

Applications Rigid Assembly Gasketing
Colour Red
Cure Schedule Temperature (Step 1) 200
Cure Schedule Temperature Unit (Step 1) °C
Fixture Time 25 min.
Fixture Time Temperature 25 °C
Full Cure Temperature 77 °F
Gap Fill 0.3 mm
Shelf Life Temperature -40 °C
Specific Gravity 1.1 g/l
Specific Gravity Temperature 25 °C
Substrates Metal: Aluminum
Temperature -65 – 300 °F
Tensile Shear Strength 7.5 N/mm²
Viscosity 500000 – 1000000 mPa.s (cP) Brookfield
Viscosity Temperature 77 °F

Description

Loctite 518 is a medium-strength general purpose gasketing product with excellent contamination tolerance Ideal for use on casted iron steel and aluminum flanges.

Loctite® 518 cures when confined in the absence of air between close-fitting metal surfaces It is an anaerobic gasketing material designed for use on rigid iron aluminum and steel flanged mating surfaces Loctite 518 fills gaps up to 0.25mm and forms a flexible chemical-resistant seal that will not tear or decay Parts disassemble easily even after extended service Typical applications include sealing close-fitting joints between rigid metal faces and flanges It is also used as a formed-in-place gasket on rigid flanged connections e.g transmissions and motor housings.
  • Semi-flexible medium-strength anaerobic flange gasket
  • Easy to automate
  • Reduces process costs – eliminates manual assembly of conventional gaskets
  • NSF P1 Reg No 123758
  • For active and inactive rigid metal flanges
  • Cures through minor surface contamination
  • Adapts to flange surface irregularities and gaps up to 0.25 mm
  • Gel-type consistency
  • Seals instantly against low pressure
  • Reduces inventory costs – no need for large inventory of cut gaskets
  • Resists high pressure when fully cured

Technical Information

Applications Rigid Assembly Gasketing
Colour Red
Cure Schedule Temperature (Step 1) 200
Cure Schedule Temperature Unit (Step 1) °C
Fixture Time 25 min.
Fixture Time Temperature 25 °C
Full Cure Temperature 77 °F
Gap Fill 0.3 mm
Shelf Life Temperature -40 °C
Specific Gravity 1.1 g/l
Specific Gravity Temperature 25 °C
Substrates Metal: Aluminum
Temperature -65 – 300 °F
Tensile Shear Strength 7.5 N/mm²
Viscosity 500000 – 1000000 mPa.s (cP) Brookfield
Viscosity Temperature 77 °F

LOCTITE 518 – Gasket Sealant – Henkel Adhesives (henkel-adhesives.com)

*** Full LOCTITE range available so if you don’t see it on our website just get in touch with us!

Loctite Adhesives Industrial Trade Manufacturing Stockist Distributor Australia
 

Description

Loctite 518 is a medium-strength general purpose gasketing product with excellent contamination tolerance Ideal for use on casted iron steel and aluminum flanges.

Loctite® 518 cures when confined in the absence of air between close-fitting metal surfaces It is an anaerobic gasketing material designed for use on rigid iron aluminum and steel flanged mating surfaces Loctite 518 fills gaps up to 0.25mm and forms a flexible chemical-resistant seal that will not tear or decay Parts disassemble easily even after extended service Typical applications include sealing close-fitting joints between rigid metal faces and flanges It is also used as a formed-in-place gasket on rigid flanged connections e.g transmissions and motor housings.
  • Semi-flexible medium-strength anaerobic flange gasket
  • Easy to automate
  • Reduces process costs – eliminates manual assembly of conventional gaskets
  • NSF P1 Reg No 123758
  • For active and inactive rigid metal flanges
  • Cures through minor surface contamination
  • Adapts to flange surface irregularities and gaps up to 0.25 mm
  • Gel-type consistency
  • Seals instantly against low pressure
  • Reduces inventory costs – no need for large inventory of cut gaskets
  • Resists high pressure when fully cured

Technical Information

Applications Rigid Assembly Gasketing
Colour Red
Cure Schedule Temperature (Step 1) 200
Cure Schedule Temperature Unit (Step 1) °C
Fixture Time 25 min.
Fixture Time Temperature 25 °C
Full Cure Temperature 77 °F
Gap Fill 0.3 mm
Shelf Life Temperature -40 °C
Specific Gravity 1.1 g/l
Specific Gravity Temperature 25 °C
Substrates Metal: Aluminum
Temperature -65 – 300 °F
Tensile Shear Strength 7.5 N/mm²
Viscosity 500000 – 1000000 mPa.s (cP) Brookfield
Viscosity Temperature 77 °F

Additional information

Dropdown

,

Brand

COLLINS TOOLS & WELDING SUPPLIES IS PROUDLY A 100% AUSTRALIAN OWNED FAMILY BUSINESS OFFERING EXPERT ADVICE AND GREAT PRICES

Testimonial

I have been doing business with Collins Tools for many years now. I have found the staff to be extremely helpful and prepared to go the extra yard to get the job done.
Greg Towers
STODDART MANUFACTURING | STODDART MANUFACTURING
The team at Collins is always helpful and it’s nice to find honest advice in such a competitive market. Collins has often gone “above and beyond” to help us with after hour service and dropping off urgent orders.
Justin Lough
Operations Manager | Marine Engineers
can confidently recommend Collins Tools as a solid reliable supplier and experts in their field ,that are willing and able to accommodate the home handy man through to large, highly skilled, modern workshops.
Glenn Field
Incitic Pivot | Welding Supervisor/Inspector

Shop

Links

Follow Us

Hi there.

Want to get in touch?

Drop us a line