The BlueVENOM XF190 is the perfect solution for light fabrication, maintenance and repairs or for DIY around the home, workshop, worksite, or farm without compromising on quality, safety and performance! With the avid welder in mind, CIGWELD has introduced “Opti-Start”, a feature that allows the user to customise their starting arc characteristics through Soft and Hard Start controls.
Additionally, this machine has the following features built-in:
• 2 x Roll All-Driven (top & bottom) Wire Drive system
• MIG Adjustable Wire Burnback & Inductance
• MIG Adjustable Soft & Hard Start (Opti-Start)
• MIG Wire Inch button
• MIG Gas Purge Button
• MIG Side door wire installation, side loader
• MIG Anti de-spooling safety feature
• MIG Spool Gun Compatible
• STICK with Voltage Reduction Device (VRD) built-in for Safe Welding
• STICK Adjustable Hot Start
• STICK Adjustable Arc Force
• STICK Anti-Stick
• Thermal Overload Protection
• TIG Foot Control Compatible
• TIG Dial Remote Torch Compatible
SMALLER, LIGHTER, YET MORE POWER
The all NEW BlueVENOM XF190 is loaded with Xtra Functions that pack a serious sting to help you get your job done
30% smaller than some other machines in its class and lighter in weight at only 9.5kg’s, the XF190 is an 3-in-1 multi-process welding machine with QuickSet Plate Thickness selection taking the guesswork out of welding!
Plate Thickness setting allows you to set up in a flash! There is no guessing the welding Use the QuickSet feature to set the machine to the correct plate thickness you are welding.
TIP: You can check the plate thickness with a measuring device, such as a ruler or vernier caliper. If two different plate thicknesses are to be joined, then add the two together and divide by 2 and use the average plate thickness as your setting
Navigate with ease through the bright blue 3” Sharp LED panel for superior clarity and ‘Plug n’ Weld’ using a 230V/240V 10 Amp plug to get you striking that arc in no time!
The XF190 can deliver awesome arc characteristics in the most popular processes of, MIG (QuickSet and Manual, Gas & Gasless), STICK (MMAW for Electrodes with VRD for extra safety) and TIG (DC Lift TIG) welding
EASY TO USE, EASY TO SET
QuickSet, simple to set & weld
Spool Gun compatible, great for Aluminium (sold separately)
Suitable for 100mm and 200mm Diameter Spools
MIG Gasless and MIG Gas Shielded
Bright Blue LED screen great for outdoor viewing
Fine tuning of Pre-Set Wire Speed & Volts
Full control over manual settings
Welding wire size selection
Recommended MIG & TIG welding thickness range 6mm – 10mm
Recommended STICK welding thickness range 6mm – 12mm
Factory Settings reset feature
You can weld most metals including Mild Steel, Stainless Steel, Aluminium and Bronze
CIGWELD have specially configured this machine to be able to produce great welding results from domestic household 230V/240V x 10A power
AWESOME OUTPUT FOR A SMALL MACHINE
The BlueVENOM XF190 delivers a maximum output of 190 Amps DC in MIG and TIG Modes, which means the machine is capable of welding metals from 0.6mm up to 10mm. In STICK mode the machine is capable of welding metals from 1.2mm up to 12mm in thickness.
WIRE DRIVE SYSTEM
2x Roll All-Driven Wire Drive system for smoother and effortless feed ability.
WARRANTY PERIOD
2-Year conditional warranty. See terms and conditions at cigweld.com.au or in the Operating Manual, included with the machine.
The BlueVENOM XF190 is the perfect solution for light fabrication, maintenance and repairs or for DIY around the home, workshop, worksite, or farm without compromising on quality, safety and performance! With the avid welder in mind, CIGWELD has introduced “Opti-Start”, a feature that allows the user to customise their starting arc characteristics through Soft and Hard Start controls.
Additionally, this machine has the following features built-in:
• 2 x Roll All-Driven (top & bottom) Wire Drive system
• MIG Adjustable Wire Burnback & Inductance
• MIG Adjustable Soft & Hard Start (Opti-Start)
• MIG Wire Inch button
• MIG Gas Purge Button
• MIG Side door wire installation, side loader
• MIG Anti de-spooling safety feature
• MIG Spool Gun Compatible
• STICK with Voltage Reduction Device (VRD) built-in for Safe Welding
• STICK Adjustable Hot Start
• STICK Adjustable Arc Force
• STICK Anti-Stick
• Thermal Overload Protection
• TIG Foot Control Compatible
• TIG Dial Remote Torch Compatible
SMALLER, LIGHTER, YET MORE POWER
The all NEW BlueVENOM XF190 is loaded with Xtra Functions that pack a serious sting to help you get your job done
30% smaller than some other machines in its class and lighter in weight at only 9.5kg’s, the XF190 is an 3-in-1 multi-process welding machine with QuickSet Plate Thickness selection taking the guesswork out of welding!
Plate Thickness setting allows you to set up in a flash! There is no guessing the welding Use the QuickSet feature to set the machine to the correct plate thickness you are welding.
TIP: You can check the plate thickness with a measuring device, such as a ruler or vernier caliper. If two different plate thicknesses are to be joined, then add the two together and divide by 2 and use the average plate thickness as your setting
Navigate with ease through the bright blue 3” Sharp LED panel for superior clarity and ‘Plug n’ Weld’ using a 230V/240V 10 Amp plug to get you striking that arc in no time!
The XF190 can deliver awesome arc characteristics in the most popular processes of, MIG (QuickSet and Manual, Gas & Gasless), STICK (MMAW for Electrodes with VRD for extra safety) and TIG (DC Lift TIG) welding
EASY TO USE, EASY TO SET
QuickSet, simple to set & weld
Spool Gun compatible, great for Aluminium (sold separately)
Suitable for 100mm and 200mm Diameter Spools
MIG Gasless and MIG Gas Shielded
Bright Blue LED screen great for outdoor viewing
Fine tuning of Pre-Set Wire Speed & Volts
Full control over manual settings
Welding wire size selection
Recommended MIG & TIG welding thickness range 6mm – 10mm
Recommended STICK welding thickness range 6mm – 12mm
Factory Settings reset feature
You can weld most metals including Mild Steel, Stainless Steel, Aluminium and Bronze
CIGWELD have specially configured this machine to be able to produce great welding results from domestic household 230V/240V x 10A power
AWESOME OUTPUT FOR A SMALL MACHINE
The BlueVENOM XF190 delivers a maximum output of 190 Amps DC in MIG and TIG Modes, which means the machine is capable of welding metals from 0.6mm up to 10mm. In STICK mode the machine is capable of welding metals from 1.2mm up to 12mm in thickness.
WIRE DRIVE SYSTEM
2x Roll All-Driven Wire Drive system for smoother and effortless feed ability.
WARRANTY PERIOD
2-Year conditional warranty. See terms and conditions at cigweld.com.au or in the Operating Manual, included with the machine.
*** Full Cigweld range available so if you don’t see it on our website just get in touch with us!
Description
The BlueVENOM XF190 is the perfect solution for light fabrication, maintenance and repairs or for DIY around the home, workshop, worksite, or farm without compromising on quality, safety and performance! With the avid welder in mind, CIGWELD has introduced “Opti-Start”, a feature that allows the user to customise their starting arc characteristics through Soft and Hard Start controls.
Additionally, this machine has the following features built-in:
• 2 x Roll All-Driven (top & bottom) Wire Drive system
• MIG Adjustable Wire Burnback & Inductance
• MIG Adjustable Soft & Hard Start (Opti-Start)
• MIG Wire Inch button
• MIG Gas Purge Button
• MIG Side door wire installation, side loader
• MIG Anti de-spooling safety feature
• MIG Spool Gun Compatible
• STICK with Voltage Reduction Device (VRD) built-in for Safe Welding
• STICK Adjustable Hot Start
• STICK Adjustable Arc Force
• STICK Anti-Stick
• Thermal Overload Protection
• TIG Foot Control Compatible
• TIG Dial Remote Torch Compatible
SMALLER, LIGHTER, YET MORE POWER
The all NEW BlueVENOM XF190 is loaded with Xtra Functions that pack a serious sting to help you get your job done
30% smaller than some other machines in its class and lighter in weight at only 9.5kg’s, the XF190 is an 3-in-1 multi-process welding machine with QuickSet Plate Thickness selection taking the guesswork out of welding!
Plate Thickness setting allows you to set up in a flash! There is no guessing the welding Use the QuickSet feature to set the machine to the correct plate thickness you are welding.
TIP: You can check the plate thickness with a measuring device, such as a ruler or vernier caliper. If two different plate thicknesses are to be joined, then add the two together and divide by 2 and use the average plate thickness as your setting
Navigate with ease through the bright blue 3” Sharp LED panel for superior clarity and ‘Plug n’ Weld’ using a 230V/240V 10 Amp plug to get you striking that arc in no time!
The XF190 can deliver awesome arc characteristics in the most popular processes of, MIG (QuickSet and Manual, Gas & Gasless), STICK (MMAW for Electrodes with VRD for extra safety) and TIG (DC Lift TIG) welding
EASY TO USE, EASY TO SET
QuickSet, simple to set & weld
Spool Gun compatible, great for Aluminium (sold separately)
Suitable for 100mm and 200mm Diameter Spools
MIG Gasless and MIG Gas Shielded
Bright Blue LED screen great for outdoor viewing
Fine tuning of Pre-Set Wire Speed & Volts
Full control over manual settings
Welding wire size selection
Recommended MIG & TIG welding thickness range 6mm – 10mm
Recommended STICK welding thickness range 6mm – 12mm
Factory Settings reset feature
You can weld most metals including Mild Steel, Stainless Steel, Aluminium and Bronze
CIGWELD have specially configured this machine to be able to produce great welding results from domestic household 230V/240V x 10A power
AWESOME OUTPUT FOR A SMALL MACHINE
The BlueVENOM XF190 delivers a maximum output of 190 Amps DC in MIG and TIG Modes, which means the machine is capable of welding metals from 0.6mm up to 10mm. In STICK mode the machine is capable of welding metals from 1.2mm up to 12mm in thickness.
WIRE DRIVE SYSTEM
2x Roll All-Driven Wire Drive system for smoother and effortless feed ability.
WARRANTY PERIOD
2-Year conditional warranty. See terms and conditions at cigweld.com.au or in the Operating Manual, included with the machine.
