AUSTRALIA WIDE SHIPPING AVAILABLE

Opening hours: Mon – Fri  7:30am – 4:30pm
View Quote
DLX2283SM Makita 18V 2 Pce Brushless Combo Kit - DHP485Z DTD153Z 2 x BL1840B DC18SD & Carry Case

DLX2283SM Makita 18V 2 Pce Brushless Combo Kit – DHP485Z DTD153Z 2 x BL1840B DC18SD & Carry Case

Brand

Makita Industrial Power Tools

Item #

DLX2283SM

MOQ

1

Categories

, ,
Add To Quote Request

Combo kit:

  • DHP485Z – 18V Brushless Hammer Driver Drill
  • DTD153Z – 18V Brushless Impact Driver
  • 2 x BL1840B – 18V Li-Ion 4.0Ah Batteries with fuel gauge
  • DC18SD – Single Port Optimum Charger
  • Tool Bag

Makita 18V Brushless Hammer Driver Drill (tool Only) DHP485

  • Brushless motor improves runtime and performance
  • 21 stage torque setting so you can adjust for the task at hand
  • 13 mm keyless chuck for easy but installation / removal by one hand
  • Twin LED job light for improved visibility in low light environments
  • Variable speed trigger for maximum control at your finger tip
  • 3 Settings – hammer setting for drilling in masonry or brick screw setting and drill setting
  • Mechanical 2 speed gearing allows you to choose between maximum rpm or higher torque
  • Ergonomic design with slim rubber grip and lighter more compact chassis to reduce fatigue and improve control
  • Belt clip to easily hang your tool
  • XPT – eXtreme Protection Technology protects your tools against dust and moisture to ensure reliable service even when in tough jobsite conditions
Specifications:
Voltage 18V
Chuck Size 1.5 – 13 mm
Capacity – Steel 13 mm
Capacity – Wood 38 mm
Capacity – Masonry 13 mm
Impacts per minute – High 0 – 28 500 ipm
Impacts per minute – Low 0 – 7 500 ipm
No Load Speed – High 0 – 1 900 rpm
No Load Speed – Low 0 – 500 rpm
Max Lock torque 50 Nm
Dimensions 182 x 79 x 255 mm
Weight 1.1 kg

Makita 18V Mobile Brushless Impact Driver DTD153Z

  • High performance brushless motor
  • One touch bit installation
  • Aluminium hammer case
  • Twin LED joblight
  • Variable speed control via trigger
  • Ergonomically designed handle with soft grip
Specifications:
Impacts Per Minute 0-3 600 ipm
Max Fastening torque 170 Nm
Net Weight 1.5 kg (BL1850B)
No Load Speed 0-3 400 rpm
Overall Length 126 mm
Capacity – Coarse Thread 22-125 mm
Capacity – High Tensile Bolt M5-M14
Capacity – Machine Screws M4-M8
Capacity – Standard Bolt M5-M16

Makita 4.0Ah Lithium Battery with Charge Indicator BL1840B-L

  • Star Protection
  • Battery Fuel Gauge
  • Multi-contact slide type terminal
  • Protective gel coating
  • Active 3 Controls current voltage and thermal temperature
  • Shock absorbing construction
  • The fastest charge times in the industry
  • Intelligent battery & charger communication system
  • Protective gel coating – Sensitive electronics are protected with a thick gel coating preventing damage against dust & moisture.
  • Shock absorbing construction – Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
  • Multi-contact slide terminal – Ensures stable contact with the tool even under extreme vibration.
  • Overload Protection – The battery and tool communicate protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
  • Over-discharge Protection – Monitors battery charge capacity and cuts power to protect battery cells.
  • Over heat protection – Extreme heat damages ALL batteries If the battery reaches a certain level of heat it will cut power to the tool.
  • Up 33% more run time than BL1830*
  • 4-Stage battery fuel indicator
  • 36 minute charge time
Specifications:
Voltage 18V
Dimensions LxWxH 11 x 8 x 6.5 cm
Weight 0.64 Kg

Makita 18V 1 Hour Charger DC18SD

  • Digital power display indicates charging level
  • More cost effective option
  • Optimum charging system to maximise cycle life and work volume
Specifications:
Cell Capacity 1.5-3.0Ah
Charge Time 30 mins (Compact) 60 mins (3.0 Ah)
Net Weight 700 g
Overall Length 151 mm
Voltage DC 7.2-18V

Description

Combo kit:

  • DHP485Z – 18V Brushless Hammer Driver Drill
  • DTD153Z – 18V Brushless Impact Driver
  • 2 x BL1840B – 18V Li-Ion 4.0Ah Batteries with fuel gauge
  • DC18SD – Single Port Optimum Charger
  • Tool Bag

Makita 18V Brushless Hammer Driver Drill (tool Only) DHP485

  • Brushless motor improves runtime and performance
  • 21 stage torque setting so you can adjust for the task at hand
  • 13 mm keyless chuck for easy but installation / removal by one hand
  • Twin LED job light for improved visibility in low light environments
  • Variable speed trigger for maximum control at your finger tip
  • 3 Settings – hammer setting for drilling in masonry or brick screw setting and drill setting
  • Mechanical 2 speed gearing allows you to choose between maximum rpm or higher torque
  • Ergonomic design with slim rubber grip and lighter more compact chassis to reduce fatigue and improve control
  • Belt clip to easily hang your tool
  • XPT – eXtreme Protection Technology protects your tools against dust and moisture to ensure reliable service even when in tough jobsite conditions
Specifications:
Voltage 18V
Chuck Size 1.5 – 13 mm
Capacity – Steel 13 mm
Capacity – Wood 38 mm
Capacity – Masonry 13 mm
Impacts per minute – High 0 – 28 500 ipm
Impacts per minute – Low 0 – 7 500 ipm
No Load Speed – High 0 – 1 900 rpm
No Load Speed – Low 0 – 500 rpm
Max Lock torque 50 Nm
Dimensions 182 x 79 x 255 mm
Weight 1.1 kg

Makita 18V Mobile Brushless Impact Driver DTD153Z

  • High performance brushless motor
  • One touch bit installation
  • Aluminium hammer case
  • Twin LED joblight
  • Variable speed control via trigger
  • Ergonomically designed handle with soft grip
Specifications:
Impacts Per Minute 0-3 600 ipm
Max Fastening torque 170 Nm
Net Weight 1.5 kg (BL1850B)
No Load Speed 0-3 400 rpm
Overall Length 126 mm
Capacity – Coarse Thread 22-125 mm
Capacity – High Tensile Bolt M5-M14
Capacity – Machine Screws M4-M8
Capacity – Standard Bolt M5-M16

Makita 4.0Ah Lithium Battery with Charge Indicator BL1840B-L

  • Star Protection
  • Battery Fuel Gauge
  • Multi-contact slide type terminal
  • Protective gel coating
  • Active 3 Controls current voltage and thermal temperature
  • Shock absorbing construction
  • The fastest charge times in the industry
  • Intelligent battery & charger communication system
  • Protective gel coating – Sensitive electronics are protected with a thick gel coating preventing damage against dust & moisture.
  • Shock absorbing construction – Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
  • Multi-contact slide terminal – Ensures stable contact with the tool even under extreme vibration.
  • Overload Protection – The battery and tool communicate protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
  • Over-discharge Protection – Monitors battery charge capacity and cuts power to protect battery cells.
  • Over heat protection – Extreme heat damages ALL batteries If the battery reaches a certain level of heat it will cut power to the tool.
  • Up 33% more run time than BL1830*
  • 4-Stage battery fuel indicator
  • 36 minute charge time
Specifications:
Voltage 18V
Dimensions LxWxH 11 x 8 x 6.5 cm
Weight 0.64 Kg

Makita 18V 1 Hour Charger DC18SD

  • Digital power display indicates charging level
  • More cost effective option
  • Optimum charging system to maximise cycle life and work volume
Specifications:
Cell Capacity 1.5-3.0Ah
Charge Time 30 mins (Compact) 60 mins (3.0 Ah)
Net Weight 700 g
Overall Length 151 mm
Voltage DC 7.2-18V

Buy Makita Industrial Power Tools Cordless Tradesman Quality Industrial Trade Manufacturing Australia Brisbane

Make It Right, Make It Makita Power Tools, LXT Lithium-ion Powered Mobile Power Tools & Outdoor Power Equipment

Full MAKITA range available so if you don’t see it on our website just get in touch with us!

 

Description

Combo kit:

  • DHP485Z – 18V Brushless Hammer Driver Drill
  • DTD153Z – 18V Brushless Impact Driver
  • 2 x BL1840B – 18V Li-Ion 4.0Ah Batteries with fuel gauge
  • DC18SD – Single Port Optimum Charger
  • Tool Bag

Makita 18V Brushless Hammer Driver Drill (tool Only) DHP485

  • Brushless motor improves runtime and performance
  • 21 stage torque setting so you can adjust for the task at hand
  • 13 mm keyless chuck for easy but installation / removal by one hand
  • Twin LED job light for improved visibility in low light environments
  • Variable speed trigger for maximum control at your finger tip
  • 3 Settings – hammer setting for drilling in masonry or brick screw setting and drill setting
  • Mechanical 2 speed gearing allows you to choose between maximum rpm or higher torque
  • Ergonomic design with slim rubber grip and lighter more compact chassis to reduce fatigue and improve control
  • Belt clip to easily hang your tool
  • XPT – eXtreme Protection Technology protects your tools against dust and moisture to ensure reliable service even when in tough jobsite conditions
Specifications:
Voltage 18V
Chuck Size 1.5 – 13 mm
Capacity – Steel 13 mm
Capacity – Wood 38 mm
Capacity – Masonry 13 mm
Impacts per minute – High 0 – 28 500 ipm
Impacts per minute – Low 0 – 7 500 ipm
No Load Speed – High 0 – 1 900 rpm
No Load Speed – Low 0 – 500 rpm
Max Lock torque 50 Nm
Dimensions 182 x 79 x 255 mm
Weight 1.1 kg

Makita 18V Mobile Brushless Impact Driver DTD153Z

  • High performance brushless motor
  • One touch bit installation
  • Aluminium hammer case
  • Twin LED joblight
  • Variable speed control via trigger
  • Ergonomically designed handle with soft grip
Specifications:
Impacts Per Minute 0-3 600 ipm
Max Fastening torque 170 Nm
Net Weight 1.5 kg (BL1850B)
No Load Speed 0-3 400 rpm
Overall Length 126 mm
Capacity – Coarse Thread 22-125 mm
Capacity – High Tensile Bolt M5-M14
Capacity – Machine Screws M4-M8
Capacity – Standard Bolt M5-M16

Makita 4.0Ah Lithium Battery with Charge Indicator BL1840B-L

  • Star Protection
  • Battery Fuel Gauge
  • Multi-contact slide type terminal
  • Protective gel coating
  • Active 3 Controls current voltage and thermal temperature
  • Shock absorbing construction
  • The fastest charge times in the industry
  • Intelligent battery & charger communication system
  • Protective gel coating – Sensitive electronics are protected with a thick gel coating preventing damage against dust & moisture.
  • Shock absorbing construction – Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
  • Multi-contact slide terminal – Ensures stable contact with the tool even under extreme vibration.
  • Overload Protection – The battery and tool communicate protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
  • Over-discharge Protection – Monitors battery charge capacity and cuts power to protect battery cells.
  • Over heat protection – Extreme heat damages ALL batteries If the battery reaches a certain level of heat it will cut power to the tool.
  • Up 33% more run time than BL1830*
  • 4-Stage battery fuel indicator
  • 36 minute charge time
Specifications:
Voltage 18V
Dimensions LxWxH 11 x 8 x 6.5 cm
Weight 0.64 Kg

Makita 18V 1 Hour Charger DC18SD

  • Digital power display indicates charging level
  • More cost effective option
  • Optimum charging system to maximise cycle life and work volume
Specifications:
Cell Capacity 1.5-3.0Ah
Charge Time 30 mins (Compact) 60 mins (3.0 Ah)
Net Weight 700 g
Overall Length 151 mm
Voltage DC 7.2-18V

Additional information

Brand

Hi there.

Want to get in touch?

Drop us a line