AUSTRALIA WIDE SHIPPING AVAILABLE
Opening hours: Mon – Fri 7:30am – 4:30pm
Brand
3M Industrial Abrasives
Item #
MOQ
Our 3M™ Trizact™ Cloth 237AA combines aluminum oxide mineral’s fine finishing qualities with a durable X-weight backing, making this abrasive a good match for workpieces that demand aggressive sanding but fine finishes.
Use 3M™ Trizact™ Cloth 237AA for finishing and polishing on stainless steel, mild steel, high nickel alloys, titanium and aluminium. Our 237AA cloth is designed for the final touch ups and refinements that come at the end of an abrasive sequence. Custom sizes are available. An X weight cloth backing provides strength and rigidity. This cloth stays tough when bent or rolled and won’t tear or shell. It’s excellent for workpieces that have already been shaped and prepped by grinding and deburring, because – at this stage of the process – parts often require an abrasive that won’t yield or deflect when run. Aluminium oxide mineral cuts sharp but leaves a soft scratch pattern, ultimately producing a smooth, brushed finish. 237AA cloth is available in grades A6 to A160, so operators can choose the right grade for their application. 3M Trizact abrasives revitalise light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Large benefits are achieved through a 3M technology called microreplication. During microreplication, small three dimensional structures resembling pyramids adhere to a backing. These pyramids contain layers of mineral that begin to break down after repeated use, continually exposing fresh mineral. This cycle of mineral renewal sustains the abrasive’s sharpness. The ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed, rather than erratic, contact for a consistent cut. From medical implants and surgical tools to automotive transmission components, 3M Trizact abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.
| Item Id | Product Code | Item Desc | Item Size | MOQ |
| AC019412207 | 237AA | A65 | 50mm x 321mm | 6 |
| AC019412223 | 237AA | A30 | 50mm x 321mm | 6 |
|
Backing Material
|
Cloth
|
|
Backing Weight
|
X Weight
|
|
Brand
|
Trizact™
|
|
Micron Grade
|
A100, A16, A160, A30, A45, A6, A65
|
|
Mineral Type
|
Aluminum Oxide
|
|
Overall Length (Metric)
|
1060 mm, 1220 mm, 1520 mm, 1680 mm, 285 mm, 315 mm, 321 mm, 3350 mm, 400 mm, 462 mm, 520 mm, 533 mm, 540 mm, 600 mm, 610 mm, 760 mm, 914 mm
|
|
Overall Width (Metric)
|
100 mm, 13 mm, 20 mm, 25 mm, 28 mm, 30 mm, 40 mm, 50 mm, 90 mm
|
|
Product Form
|
Belt
|
Our 3M™ Trizact™ Cloth 237AA combines aluminum oxide mineral’s fine finishing qualities with a durable X-weight backing, making this abrasive a good match for workpieces that demand aggressive sanding but fine finishes.
Use 3M™ Trizact™ Cloth 237AA for finishing and polishing on stainless steel, mild steel, high nickel alloys, titanium and aluminium. Our 237AA cloth is designed for the final touch ups and refinements that come at the end of an abrasive sequence. Custom sizes are available. An X weight cloth backing provides strength and rigidity. This cloth stays tough when bent or rolled and won’t tear or shell. It’s excellent for workpieces that have already been shaped and prepped by grinding and deburring, because – at this stage of the process – parts often require an abrasive that won’t yield or deflect when run. Aluminium oxide mineral cuts sharp but leaves a soft scratch pattern, ultimately producing a smooth, brushed finish. 237AA cloth is available in grades A6 to A160, so operators can choose the right grade for their application. 3M Trizact abrasives revitalise light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Large benefits are achieved through a 3M technology called microreplication. During microreplication, small three dimensional structures resembling pyramids adhere to a backing. These pyramids contain layers of mineral that begin to break down after repeated use, continually exposing fresh mineral. This cycle of mineral renewal sustains the abrasive’s sharpness. The ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed, rather than erratic, contact for a consistent cut. From medical implants and surgical tools to automotive transmission components, 3M Trizact abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.
| Item Id | Product Code | Item Desc | Item Size | MOQ |
| AC019412207 | 237AA | A65 | 50mm x 321mm | 6 |
| AC019412223 | 237AA | A30 | 50mm x 321mm | 6 |
|
Backing Material
|
Cloth
|
|
Backing Weight
|
X Weight
|
|
Brand
|
Trizact™
|
|
Micron Grade
|
A100, A16, A160, A30, A45, A6, A65
|
|
Mineral Type
|
Aluminum Oxide
|
|
Overall Length (Metric)
|
1060 mm, 1220 mm, 1520 mm, 1680 mm, 285 mm, 315 mm, 321 mm, 3350 mm, 400 mm, 462 mm, 520 mm, 533 mm, 540 mm, 600 mm, 610 mm, 760 mm, 914 mm
|
|
Overall Width (Metric)
|
100 mm, 13 mm, 20 mm, 25 mm, 28 mm, 30 mm, 40 mm, 50 mm, 90 mm
|
|
Product Form
|
Belt
|
Our 3M™ Trizact™ Cloth 237AA combines aluminum oxide mineral’s fine finishing qualities with a durable X-weight backing, making this abrasive a good match for workpieces that demand aggressive sanding but fine finishes.
Use 3M™ Trizact™ Cloth 237AA for finishing and polishing on stainless steel, mild steel, high nickel alloys, titanium and aluminium. Our 237AA cloth is designed for the final touch ups and refinements that come at the end of an abrasive sequence. Custom sizes are available. An X weight cloth backing provides strength and rigidity. This cloth stays tough when bent or rolled and won’t tear or shell. It’s excellent for workpieces that have already been shaped and prepped by grinding and deburring, because – at this stage of the process – parts often require an abrasive that won’t yield or deflect when run. Aluminium oxide mineral cuts sharp but leaves a soft scratch pattern, ultimately producing a smooth, brushed finish. 237AA cloth is available in grades A6 to A160, so operators can choose the right grade for their application. 3M Trizact abrasives revitalise light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Large benefits are achieved through a 3M technology called microreplication. During microreplication, small three dimensional structures resembling pyramids adhere to a backing. These pyramids contain layers of mineral that begin to break down after repeated use, continually exposing fresh mineral. This cycle of mineral renewal sustains the abrasive’s sharpness. The ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed, rather than erratic, contact for a consistent cut. From medical implants and surgical tools to automotive transmission components, 3M Trizact abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.
| Item Id | Product Code | Item Desc | Item Size | MOQ |
| AC019412207 | 237AA | A65 | 50mm x 321mm | 6 |
| AC019412223 | 237AA | A30 | 50mm x 321mm | 6 |
|
Backing Material
|
Cloth
|
|
Backing Weight
|
X Weight
|
|
Brand
|
Trizact™
|
|
Micron Grade
|
A100, A16, A160, A30, A45, A6, A65
|
|
Mineral Type
|
Aluminum Oxide
|
|
Overall Length (Metric)
|
1060 mm, 1220 mm, 1520 mm, 1680 mm, 285 mm, 315 mm, 321 mm, 3350 mm, 400 mm, 462 mm, 520 mm, 533 mm, 540 mm, 600 mm, 610 mm, 760 mm, 914 mm
|
|
Overall Width (Metric)
|
100 mm, 13 mm, 20 mm, 25 mm, 28 mm, 30 mm, 40 mm, 50 mm, 90 mm
|
|
Product Form
|
Belt
|
| Dropdown | AC019412207 – A65 50mmx321mm / MOQ: 6, AC019412223 – A30 50mmx321mm / MOQ: 6 |
|---|---|
| Brand |
