AUSTRALIA WIDE SHIPPING AVAILABLE

Opening hours: Mon – Fri  7:30am – 4:30pm

LOC50ML510 Loctite 510 High Temperature Flange Sealant – Gasket Eliminator / Select Size

Item #

LOC50ML510

MOQ

1
Loctite Adhesives Industrial Trade Manufacturing Stockist Distributor Australia

LOCTITE® 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange faces on transmissions and motor casings. It ensures an instant, low-pressure seal. The product increases the torque capacity of assembled flanges.

  • For metal flanges
  • High temperature resistant flange gasket
  • Adapts to flange surface irregularities and scratches up to 0.25 mm
  • Increases the torque capacity of assembled flanges
  • P1 NSF Reg. No.: 123007

Technical Information

Application methodDispense system, Manual, Screen printing
ApplicationsFor close fitting parts, For high temperature applications, Rigid assembly gasketing, Sealing
Chemical basis / baseDimethacrylate ester
ColourPink
Cure typeAnaerobic cure
Fixture time, Steel25.0 min.
Gap fill, Unprimed0.25 mm
Key characteristicsChemical resistant, For machined, rigid flanges, Strength: medium strength, Thixotropic
Number of components1 part
Operating temperature-65.0 – 400.0 °F (-55.0 – 200.0 °C )
Physical formGel
Recommended for use withMetal: aluminium, Metal: steel
Storage temperature8.0 – 21.0 °C
Viscosity, 20 RPM90000.0 mPa·s (cP)

Description

LOCTITE® 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange faces on transmissions and motor casings. It ensures an instant, low-pressure seal. The product increases the torque capacity of assembled flanges.

  • For metal flanges
  • High temperature resistant flange gasket
  • Adapts to flange surface irregularities and scratches up to 0.25 mm
  • Increases the torque capacity of assembled flanges
  • P1 NSF Reg. No.: 123007

Technical Information

Application methodDispense system, Manual, Screen printing
ApplicationsFor close fitting parts, For high temperature applications, Rigid assembly gasketing, Sealing
Chemical basis / baseDimethacrylate ester
ColourPink
Cure typeAnaerobic cure
Fixture time, Steel25.0 min.
Gap fill, Unprimed0.25 mm
Key characteristicsChemical resistant, For machined, rigid flanges, Strength: medium strength, Thixotropic
Number of components1 part
Operating temperature-65.0 – 400.0 °F (-55.0 – 200.0 °C )
Physical formGel
Recommended for use withMetal: aluminium, Metal: steel
Storage temperature8.0 – 21.0 °C
Viscosity, 20 RPM90000.0 mPa·s (cP)
Item Type510 GASKET ELIMINATOR®
Container TypeTube
Container Size50ml / 250ml
UNSPSC Code31401904
UNSPSC DescriptionAnaerobic liquid gasket
Compound Number510
Unit Of MeasureTUBE

LOCTITE 510 Flange Sealant

*** Full LOCTITE range available so if you don’t see it on our website just get in touch with us!Loctite Adhesives Industrial Trade Manufacturing Stockist Distributor Australia

Description

LOCTITE® 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange faces on transmissions and motor casings. It ensures an instant, low-pressure seal. The product increases the torque capacity of assembled flanges.

  • For metal flanges
  • High temperature resistant flange gasket
  • Adapts to flange surface irregularities and scratches up to 0.25 mm
  • Increases the torque capacity of assembled flanges
  • P1 NSF Reg. No.: 123007

Technical Information

Application methodDispense system, Manual, Screen printing
ApplicationsFor close fitting parts, For high temperature applications, Rigid assembly gasketing, Sealing
Chemical basis / baseDimethacrylate ester
ColourPink
Cure typeAnaerobic cure
Fixture time, Steel25.0 min.
Gap fill, Unprimed0.25 mm
Key characteristicsChemical resistant, For machined, rigid flanges, Strength: medium strength, Thixotropic
Number of components1 part
Operating temperature-65.0 – 400.0 °F (-55.0 – 200.0 °C )
Physical formGel
Recommended for use withMetal: aluminium, Metal: steel
Storage temperature8.0 – 21.0 °C
Viscosity, 20 RPM90000.0 mPa·s (cP)

Additional information

Dropdown

,

Brand

Hi there.

Want to get in touch?

Drop us a line