Description
NB: LARGE MACHINE – DELIVERY SOUTH EAST QLD ONLY
Combine immense power and smooth arc characteristics even in the toughest conditions. The WORKSHOP 390 SWF is designed for medium and heavy fabrication.
- The steady, reliable transformer power source can handle tougher conditions than an inverter machine
- The separate wire feeder gives you an extra 10m range for the ultimate maneuverability
- Built in Europe, you get the highest quality welds
In the box:
- WORKSHOP 390 SWF Welder
- KT50 SWF Unit
- 10m interconnecting cables
- 4m SB36 MIG Torch
- 10m 500A Earth Clamp & Lead
- Twin Gauge Argon Regulator
- 2m Gas Hose Complete with fittings
- Operating Manual
- 2x 0.9-1.2mm V Groove Roller
Features
Transformer Power Source
- Tried and tested technology, the transformer power source is simple, reliable, and long-lasting.
Separate Wire Feeder
- Bring the wire to your weld. The separate wire feeder unit can be removed from the power source with a range of 10 metres, for added versatility even when the machine can’t be moved.
Made in Europe
- Built in Europe, you can guarantee that you’re getting the highest level of quality and maximum performance from the machine.
4 Geared Wire Drive
- The most consistent and smoothest wire-feeding experience there is. With a four geared wire drive unit, there’s more power pushing the wire, improving the wire feeding, especially in longer torches.
30 Voltage Steps
- Get the ultimate precision over your weld bead. With up to 30 voltage steps, you can adjust your weld in small increments so that it’s just right.
250mm Cooling Fan
- Built to be durable, the large 250mm cooling fan with an enclosed motor maximises the cooling, increasing the duty cycle and keeping your machine going for longer.
Gas Check
- The gas check ensures that your gas bottle is connected and that the gas pressure is dialled in to protect every weld.
Spot Mode
- Get perfectly even tacks every time. Spot mode creates a series of consecutive and evenly timed arcs that work well if you want perfectly even tacks and small welds. Adjust your tacks exactly how you want them with the spot time and interval time settings.
Burnback
- Stop your wire from ever fusing with your weld or your contact tips again. Tune your burnback control to suit how much wire you want to remain sticking out from your torch when you finish a weld.
Soft Start
- Start a weld flawlessly with the soft start function. By slowing the initial burst of wire feeding, the weld pool is established without being explosive, improving the quality of the beginning of the weld.
