AUSTRALIA WIDE SHIPPING AVAILABLE
Opening hours: Mon – Fri 7:30am – 4:30pm
Item #
MOQ
Categories
TR250D – Two Welder Unit – Three Phase
• Two person 250 amp air cooled on-gun fume extraction system
• Up to 98% capture rate leaves shielding gas unaffected
• Two ergonomic and super lightweight welding guns
• Extraction system self cleans with auto start and stop
• 100% duty cycle with Euro connection
• Kit includes everything you need to get started with on-gun extraction
Package includes:
On-gun fume extraction is one of the safest and most effective methods of controlling welding fume and is heavily used and relied upon in Europe and North America. However, for the reasons above, on-gun extraction has not taken off in Australia or New Zealand.
AWS has teamed up with Translas, Dutch on-gun fume extraction specialist, to launch an industry first: a range of lightweight, manoeuvrable, and ergonomic extraction guns that deliver the highest capture rate on the market – up to 98% – while leaving the shielding gas completely unaffected.
No other welding fume control solution captures welding fume at the source, removes it from the environment, and most importantly, follows the welder as they move. Experience Translas fume extraction technology today.
* Confined spaces can be deadly and decisions on how to handle a specific confined space must be assessed on the spot and always comes down to the specifics of the individual situation. There should be a suitably trained and knowledgeable person doing the assessment and design of a safe system for any confined space entry.
When you consider a welding fume particle that is 0.5 μm in size can take 2 days to reach the floor when released from a height of 1.5 metres, you begin to understand how long these carcinogenic particles can remain suspended in the air. This is vital to consider when sharing a work environment with welders, as the air could contain respiratory hazards long after welding has been completed.
On-gun fume extraction can assist in reducing exposure to welding fume and other airborne contaminants, not only for the welder, but also for those who work near welding operations. This is the key difference between on-gun fume extraction and Personal Protective Equipment (PPE) used by the welder. PPE can only protect the welder, while on-gun fume extraction can protect the welder and stop the spread of fume throughout the workplace protecting all workers from welding fume exposure.
For this reason, on-gun fume extraction can be the most economical method to protect all workers from welding fume exposure in shared working environments.
TRANSLAS CLEARO2 EXTRACTION UNITS
Translas On-Gun 8XE MIG welding fume extraction torches when coupled with the Translas ClearO2 Extraction Units lead the industry with capture rate up to 98%.
Click on the options below for technical specifications of each unit.
TRANSLAS CLEARO2 EXTRACTION UNITS
Translas On-Gun 8XE MIG welding fume extraction torches when coupled with the Translas ClearO2 Extraction Units lead the industry with capture rate up to 98%.
TR250D – Two Welder Unit – Three Phase
• Two person 250 amp air cooled on-gun fume extraction system
• Up to 98% capture rate leaves shielding gas unaffected
• Two ergonomic and super lightweight welding guns
• Extraction system self cleans with auto start and stop
• 100% duty cycle with Euro connection
• Kit includes everything you need to get started with on-gun extraction
Package includes:
On-gun fume extraction is one of the safest and most effective methods of controlling welding fume and is heavily used and relied upon in Europe and North America. However, for the reasons above, on-gun extraction has not taken off in Australia or New Zealand.
AWS has teamed up with Translas, Dutch on-gun fume extraction specialist, to launch an industry first: a range of lightweight, manoeuvrable, and ergonomic extraction guns that deliver the highest capture rate on the market – up to 98% – while leaving the shielding gas completely unaffected.
No other welding fume control solution captures welding fume at the source, removes it from the environment, and most importantly, follows the welder as they move. Experience Translas fume extraction technology today.
* Confined spaces can be deadly and decisions on how to handle a specific confined space must be assessed on the spot and always comes down to the specifics of the individual situation. There should be a suitably trained and knowledgeable person doing the assessment and design of a safe system for any confined space entry.
When you consider a welding fume particle that is 0.5 μm in size can take 2 days to reach the floor when released from a height of 1.5 metres, you begin to understand how long these carcinogenic particles can remain suspended in the air. This is vital to consider when sharing a work environment with welders, as the air could contain respiratory hazards long after welding has been completed.
On-gun fume extraction can assist in reducing exposure to welding fume and other airborne contaminants, not only for the welder, but also for those who work near welding operations. This is the key difference between on-gun fume extraction and Personal Protective Equipment (PPE) used by the welder. PPE can only protect the welder, while on-gun fume extraction can protect the welder and stop the spread of fume throughout the workplace protecting all workers from welding fume exposure.
For this reason, on-gun fume extraction can be the most economical method to protect all workers from welding fume exposure in shared working environments.
TRANSLAS CLEARO2 EXTRACTION UNITS
Translas On-Gun 8XE MIG welding fume extraction torches when coupled with the Translas ClearO2 Extraction Units lead the industry with capture rate up to 98%.
Click on the options below for technical specifications of each unit.
TRANSLAS CLEARO2 EXTRACTION UNITS
Translas On-Gun 8XE MIG welding fume extraction torches when coupled with the Translas ClearO2 Extraction Units lead the industry with capture rate up to 98%.
TR250D – Two Welder Unit – Three Phase
• Two person 250 amp air cooled on-gun fume extraction system
• Up to 98% capture rate leaves shielding gas unaffected
• Two ergonomic and super lightweight welding guns
• Extraction system self cleans with auto start and stop
• 100% duty cycle with Euro connection
• Kit includes everything you need to get started with on-gun extraction
Package includes:
On-gun fume extraction is one of the safest and most effective methods of controlling welding fume and is heavily used and relied upon in Europe and North America. However, for the reasons above, on-gun extraction has not taken off in Australia or New Zealand.
AWS has teamed up with Translas, Dutch on-gun fume extraction specialist, to launch an industry first: a range of lightweight, manoeuvrable, and ergonomic extraction guns that deliver the highest capture rate on the market – up to 98% – while leaving the shielding gas completely unaffected.
No other welding fume control solution captures welding fume at the source, removes it from the environment, and most importantly, follows the welder as they move. Experience Translas fume extraction technology today.
* Confined spaces can be deadly and decisions on how to handle a specific confined space must be assessed on the spot and always comes down to the specifics of the individual situation. There should be a suitably trained and knowledgeable person doing the assessment and design of a safe system for any confined space entry.
When you consider a welding fume particle that is 0.5 μm in size can take 2 days to reach the floor when released from a height of 1.5 metres, you begin to understand how long these carcinogenic particles can remain suspended in the air. This is vital to consider when sharing a work environment with welders, as the air could contain respiratory hazards long after welding has been completed.
On-gun fume extraction can assist in reducing exposure to welding fume and other airborne contaminants, not only for the welder, but also for those who work near welding operations. This is the key difference between on-gun fume extraction and Personal Protective Equipment (PPE) used by the welder. PPE can only protect the welder, while on-gun fume extraction can protect the welder and stop the spread of fume throughout the workplace protecting all workers from welding fume exposure.
For this reason, on-gun fume extraction can be the most economical method to protect all workers from welding fume exposure in shared working environments.
TRANSLAS CLEARO2 EXTRACTION UNITS
Translas On-Gun 8XE MIG welding fume extraction torches when coupled with the Translas ClearO2 Extraction Units lead the industry with capture rate up to 98%.
Click on the options below for technical specifications of each unit.
TRANSLAS CLEARO2 EXTRACTION UNITS
Translas On-Gun 8XE MIG welding fume extraction torches when coupled with the Translas ClearO2 Extraction Units lead the industry with capture rate up to 98%.
| Select | TR250S TRANSLAS 250 THREE PHASE SINGLE PERSON KIT, TR250D TRANSLAS 250 THREE PHASE DOUBLE PERSON KIT |
|---|---|
| Brand |
