Description
The UNIMIG Workshop 390 (KUM390) is a heavy-duty, industrial-grade 415V three-phase MIG welder engineered for serious commercial fabrication. Proudly manufactured in Europe, this robust machine features a high-performance copper-wound transformer power source that delivers a massive 70% duty cycle at 355 Amps.
Built to survive harsh workshop and rural environments, the KUM390 outlasts fragile modern inverters while providing flawless weld quality. Equipped with 30 voltage switching steps and a geared 4-wheel drive system, it ensures precision wire feed control on heavy steel plate, structural beams, and medium fabrication.
- the steady, reliable transformer power source can handle tougher conditions than an inverter machine
- Made in Europe for A top-quality product
- Customise your arc with some of the machine Features like pre- and post-gas, burnback and soft start
Features
Transformer Power Source
- Tried and tested technology, the transformer power source is simple, reliable, and long-lasting.
Made in Europe
- Built in Europe, you can guarantee that you’re getting the highest level of quality and maximum performance from the machine.
4 Geared Wire Drive
- The most consistent and smoothest wire-feeding experience there is. With a four geared wire drive unit, there’s more power pushing the wire, improving the wire feeding, especially in longer torches.
30 Voltage Steps
- Get the ultimate precision over your weld bead. With up to 30 voltage steps, you can adjust your weld in small increments so that it’s just right.
250mm Cooling Fan
- Built to be durable, the large 250mm cooling fan with an enclosed motor maximises the cooling, increasing the duty cycle and keeping your machine going for longer.
Gas Check
- The gas check ensures that your gas bottle is connected and that the gas pressure is dialled in to protect every weld.
Spot Mode
- Get perfectly even tacks every time. Spot mode creates a series of consecutive and evenly timed arcs that work well if you want perfectly even tacks and small welds. Adjust your tacks exactly how you want them with the spot time and interval time settings.
Burnback
- Stop your wire from ever fusing with your weld or your contact tips again. Tune your burnback control to suit how much wire you want to remain sticking out from your torch when you finish a weld.
Soft Start
- Start a weld flawlessly with the soft start function. By slowing the initial burst of wire feeding, the weld pool is established without being explosive, improving the quality of the beginning of the weld.
